How To Set Up A Small Peer To Peer Network

CrocoTime is designed to operate in hierarchical networks. Withal, the programme works in peer-to-peer local expanse networks as well. This detailed guide will lead you through peer-to-peer network configuration process.

In a peer-to-peer network, all computers have the same rights. Each computer tin can act as a customer and as a server.

A peer-to-peer network is almost always represented by a work group. Such a network is advisable if the number of computers does not exceed 20 and the security of your data is not so disquisitional. The bulk of small business organizations use this type of local expanse network.

It is important to recall that configuration of a LAN must exist performed using the administrator account.

1. Setting up a workgroup

When configure your local network you must first make sure that all the computers in information technology are merged into one workgroup. To determine which workgroup calculator is located in, click Start, right-click Computer and selectBackdrop from the context menu. The System window shall open. In the lower right corner of the window, select Change settings and bank check the workgroup proper noun in the System backdrop window. Past default, the workgroup in Windows is called WORKGROUP. You can come up up with your own proper name or utilise already available proper noun of your existing workgroup. You can change the name by clicking Edit.

It is important to apply Latin characters only in lodge to avoid problems with admission to network resources. The computer name tin be inverse in this window. After the changes, click Apply and OK. Windows will prompt you to restart the calculator. Reboot and follow further instructions.

2. Configuring network adapters

At this stage, yous must make sure that the workgroup computers have the aforementioned IP accost range, the same subnet mask and default gateway (if you lot have a router to provide Internet access). For example, if there are xx computers in your network each computer should have an IP address similar: 192.168.1.ane for the showtime computer, 192.168.1.2 for the 2d computer, etc. and 192.168.one.20 for the twentieth computer.

Subnet mask should exist the same for all computers in your organization, e.m. 255.255.255.0.

The default gateway is the IP address of your gateway (router), east.g. 192.168.1.100.

You may accept enabled DHCP – the network protocol that allows a computer to get an IP address and other parameters necessary for networking automatically. If DHCP is enabled, and then when configuring CrocoTime fourth dimension tracker, you must specify the name of the estimator where the CrocoTime server is installed instead of its IP address. If DHCP is disabled, you tin specify the server's IP address.

To find out whether DHCP is used see the network adapter properties (Control Panel -> Network and Internet, click Network and sharing Center -> Change adapter settings -> LAN connection -> Information).

3. Setting upwards user accounts

Prior to configuring user accounts in Windows, y'all must open Network and Sharing Center and allow File sharing and Public folder sharing. This has to be done on each computer in your network.

Configuring user accounts for Windows 7, 8 Professional and higher is best done through the Managementconsole. To open up the panel, correct-click Calculator and select Manage from the pop-up bill of fare. In the panel tree, expand the list of Utilities, so the list of Local Users and Groups. If the list of Local Users and Groups is non displayed most likely y'all are logged in equally a standard user or administrator account is disabled. Follow the instructions to enable the ambassador business relationship, and run information technology as administrator. Open the folder Local Users and Groups once more and create or rename your accounts by clicking on it with right mouse button and selectingRename.

In Windows 7, 8 below Professional, an business relationship with administrator privileges is configured through the User accounts console which tin can be invoked via the control prompt using the command netplwiz. Click Addbutton to launch user account sorcerer. Specify the account name such as «admin», the display (or full) name, and password. Make the account a fellow member of the Administrator group.

Using the administrator account brand sure that each of your computers has access to shared network resources. To do this, open any binder and in the address bar type the address in the class of \\computer_name\admin$, e.thousand. \\COMP1\admin$. If a folder is opened then computers inside the network are able to commutation information with full access to any resources. If the system prompts yous to confirm the access, type the Administrator account information in the box and click OK.

Now you can fix admission rights to user accounts of computers, if necessary. Navigate to Local Users and Groups (or to the User Accounts panel), open the properties of the user account y'all need and click Group Membership tab. Click Add and select the groups with full or limited access rights (these rights can be configured for each object to be accessed over the network). You should remember that for ease of administration (access to computers on the network) this user account must be nowadays on each computer and each reckoner must be configured to allow access of this user account to specific objects (documents, folders, and printers).

After y'all assign access rights and create the necessary accounts, configuration of the local surface area network is completed. You can continue to installation of CrocoTime – smart time tracking and employee productivity monitoring software.