How To Change Settings On Vizio Sound Bar

Zylux Audio-visual Corporation 28 inch Sound Bar 2.1 Organisation

QUICK START GUIDE

SB2821-D6

Package Contents

Remote Control

1. Power – Press to plough the sound bar on or off.
2.Input – Press to modify input source.
3.Bluetooth – Printing to enter Bluetooth input. (To enter force pair mode, printing and hold for five seconds)
four.Volume (+/-) – Press to increment and subtract volume levels.
5.Enter/Play/Pause – Press to select an option. Press to play or intermission.
6.Previous – Press to render to previous track. (Changes Subwoofer, Treble, and Bass levels)
7.Next – Press to skip to the next rail. (Changes Subwoofer, Treble, and Bass levels)
viii.TruVolume – Printing to enable/disable TruVolume.
nine.TruSurround Hard disk – Press to enable/disable TruSurround HD.
ten.Mute – Press to mute/unmute.
11.Moving-picture show – Printing to enable Movie preset EQ mode.
12.Music – Press to enable Music preset EQ mode.
13.SUB – Press to enter subwoofer level adjustment mode. (Apply Previous/Next buttons to arrange levels)
14.Bass – Press to enter bass level adjustment mode. (Utilise Previous/Next buttons to arrange levels)
15. Treble – Printing to enter treble level adjustment mode. (Apply Previous/Adjacent buttons to adjust levels)

Inserting and replacing batteries.
2 AAA batteries are included for you to employ with the basic remote control. To insert/replace the batteries:
1. Remove the battery cover by gently sliding it abroad from the remote.
ii. Insert two AAA batteries (included). Be sure to marshal the + and – signs on the batteries and remote.
3. Supervene upon the bombardment encompass.

Alarm: proceed the remote control batteries away from children. It may cause choking and/or pb to a burn or chemical burn if mishandled. Do not dispose of batteries in fire. Supervene upon only with batteries of the correct blazon.

When needed, VIZIO recommends replacing the batteries that came with this remote with two, new Duracell 'AAA' alkaline batteries.

Controls & Connections

one. Bluetooth Input – Hold to pair. (See Bluetooth Pairing for more than information)
two. Volume – Increase or decrease the loudness of the audio.
three. Input – Printing to change the sound source.
iv. Power – Press to turn sound bar on or off.

Back of Sound Bar

1. DC IN – Ability Port
2. USB – USB In
3. Optical – Digital Optical Audio in
4. Digital – Coaxial In
5. AUX – Analog Audio In (Stereo RCA)
6. AUX – Analog Audio In (Stereo iii.5mm)

First-Time Setup

Note: Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-Ray player, game organization, etc.) see your device'southward user manual.

* When using either of the Digital Inputs, if at that place is no sound: (A) try setting the Idiot box output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.

iv. Connect the ability cable to the Subwoofer Air-conditioning IN as shown. Plug the ability cable into an electrical outlet. Flip the Power Switch into the On position.

5. For the best environment sound experience, position the Sound Bar equally shown. The Sound Bar should be shut to ear level. The Subwoofer should be placed in a corner of the room.

6. Turn your Telly on, the Sound Bar will automatically turn on and begin searching for an agile input.

The LED indicators on the front of the Sound Bar will brainstorm cycling in pairs through inputs until an audio source is detected.* You tin can press the INPUT button to switch between audio sources. For case, if yous connected your TV to Input 1, prepare the Sound Bar to Input ane.

LED Indicators

Bluetooth Pairing
To pair the Sound Bar with a Bluetooth device:
one. Press and hold the Bluetooth push on the Sound Bar or the Bluetooth button on the remote for five (5) seconds. When the Sound Bar is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar will lite sequentially from bottom to top and dorsum once again.Once the device is paired, the LED Indicators will stop flashing.
2. You can at present search for the Audio Bar (VIZIO SB2821) using your Bluetooth device. For more data, refer to the user documentation that came with the device.
3. Play audio from your Bluetooth device. Volume can be controlled on your source device and the Sound
Bar.

Using Bluetooth Way
Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, encounter your device'south documentation for more information. One time you lot have paired your source device to the Sound Bar, as long as you stay inside range of the Sound Bar, your device should remain paired, even if you change the input on the Audio Bar.

Maximizing Point
A Bluetooth bespeak has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, and so streamed music may lose some integrity when compared to a wired connexion.
Try the following if your sound quality is less than optimal:

• If you hear any intermission-up or disconnect while streaming music from your device, move the source device closer to the Sound Bar.

• Be sure that there are no solid obstructions in the line-of-sight betwixt the Sound Bar and the source device.

• Other wireless devices can touch Bluetooth range, including wireless security cameras, wireless video infant monitors, cordless phones, and microwave ovens. Turning off or moving these devices may amend Bluetooth range.

Reconnecting the Subwoofer

The Subwoofer has already been paired with the Sound Bar by VIZIO. However, the Subwoofer may need to exist re-linked to the Sound Bar if there is no sound coming from the Subwoofer.

<<>> What does pairing mean? Pairing means to wirelessly connect.

First confirm that the power switch is in the ON position. Press and hold the Pairing push button on the back of the Subwoofer for 5 seconds. The LED on the back of the Subwoofer volition begin to blink.

Press and hold the Ability push on the height of the Sound Bar for v Seconds. The LED indicators on the front volition wink 3 times. The Subwoofer is now linked with the Sound Bar.

Using Button Combinations

There are three functions that are triggered past iii dissimilar button combinations on the Sound Bar.

Wall-Mounting the Sound Bar

Insert the two wall-mount screws into the wall-mount screw holes, and then tighten them with a Phillips screwdriver.

Identify the included wall mounting template against the wall under your Goggle box. Marking the four bracket holes using a pencil.

Be certain your screws are attached to wood studs, drywall anchors (for drywall), or concrete anchors
(for brick/physical walls). Screws for attaching the brackets to the wall are not included. Cull the screw blazon and length appropriate to your abode'southward construction. If in dubiety, consult a professional installer.

Questions nearly your Zylux Audio-visual Corporation 28 inch Sound Bar ii.1 System? Postal service in the comments!
Zylux Acoustic Corporation 28 inch Audio Bar 2.one System Transmission [PDF]

Source: https://manuals.plus/vizio/vizio-sound-bar-manual

Share this post